PUBLICATIONS

게재 논문

연구과제 논문 특허
나노복합소재연구실의 출판된 논문 입니다.
최문희 박사 23편
2026
  • Synergistic effects of dielectric polarization and ball-milling-induced structural evolution in graphite/TiO2 composite anodes for high-performance lithium-ion batteries
    Journal of Power Sources, Vol. 690, pp. 240867
2025
  • Enhancing dielectric properties of BaZrTiO3 via controlled anatase/rutile core-shell TiO2
    Journal of the American Ceramic Society, Vol. 108, No. 6, pp. e20428
  • Dielectric surface modification of NCM cathodes using BaTiO₃ for high-rate lithium-ion batteries
    Composites Research, Vol. 38, No. 4, pp. 414-420
  • Stabilizing high-voltage LiCoO2 cathodes with dielectric coating: insights into polarization-driven Li+ transport
    Applied Materials Today, Vol. 47, pp. 102957
2024
  • Exploration of surface treatment and liquid additive processing for enhanced multilayer ceramic capacitors performance
    Materialia, Vol. 33, pp. 101994
  • Systematic determination of the optimized Zr content of Ba (ZrxTi1-x) O3 with high dielectric constant at room temperature for high-voltage system application
    Journal of the Korean Ceramic Society, Vol. 61, No. 3, pp. 391-401
  • Enhancing Charge--Discharge Speed of Li-Ion Batteries with BaTiO3-Coated LiCoO2
    Journal of the Electrochemical Society, Vol. 171, No. 11, pp. 110519
  • Slurry Synthesis and Thin-Film Fabrication Toward Production of Li₂O-B₂O₃-Al₂O₃-Based Multilayer Oxide Solid-State Batteries for Internet of Things Applications
    Micromachines, Vol. 16, No. 1, pp. 39
  • TiO2 phase-controlled synthesis of Li-La-TiO solid electrolytes for advanced all-solid-state batteries
    Journal of Asian Ceramic Societies, Vol. 12, No. 4, pp. 296-305
2023
  • Enhancement of dielectric properties and microstructure control of BaTiO3 by seed-induced solid-state synthesis
    Ceramics International, Vol. 49, No. 11, pp. 17921-17929
  • Controlling composite TiO2 powder characteristics in the solid-state synthesis of BaTiO3 powders for improved sintering and permittivity: a comparative study
    Applied Sciences, Vol. 13, No. 17, pp. 9720
2022
  • Effects of magnetizing yoke design on the magnetic properties of Nd2Fe14B permanent magnet for electric vehicle motor applications
    Applied Sciences, Vol. 12, No. 15, pp. 7813
  • Major factors affecting the dielectric properties and reliability of solid stated reacted BaTiO3 powders for capacitor
    Journal of Asian Ceramic Societies, Vol. 10, No. 4, pp. 713-721
2020
  • Development of a highly densified magnetic sheet for inductors and advanced processes through silane surface treatment of Fe nanopowder
    Applied Sciences, Vol. 10, No. 14, pp. 4770
2017
  • Boron behavior induced lamellar structure and anisotropic magnetic properties of Nd2Fe14B during HDDR process
    Journal of the Korean Physical Society, Vol. 71, No. 3, pp. 130-133
2015
  • Novel synthesizing method of BaFe12O19 micro rod and its superior coercivity with shape anisotropy
    Materials Letters, Vol. 139, pp. 292-295
  • Simultaneous enhancement in coercivity and remanence of Nd2Fe14B permanent magnet by grain boundary diffusion process using NdHx
    Current applied physics, Vol. 15, No. 4, pp. 461-467
2014
  • Synthesis and characterization of hollow BaFe12O19 submicron spheres for advance functional magnetic materials
    Current Applied Physics, Vol. 14, No. 9, pp. 1208-1211
2011
  • Improvement of the magnetic properties of Nd2Fe14B powders by dysprosium diffusion
    Reviews on Advanced Materials Science, Vol. 28, No. 2, pp. 134-140
  • Coercivity enhancement in Nd2Fe14B permanent magnetic powders through rotating diffusion process with DyHx powders
    Journal of Magnetics, Vol. 16, No. 4, pp. 342-349
2010
  • A study on Magnetic Properties of BaFe 12 O 19 Fabricated by Ultrasonic Spray-pyrolysis Process Using Self-Assembly Method
    Journal of Powder Materials, Vol. 17, No. 4, pp. 263-269
2009
  • 자기 조립법을 이용한 BaFe12O\_19 의 제조 및 자성 특성에 대한 연구
    한국분말재료학회지 (구 한국분말야금학회지), Vol. 16, No. 6, pp. 410-415
2007
  • Synthesis of Hollow Sphere CdSe from CdCl2 Aqueous Solution Containing Ethylenediamine
    Key Engineering Materials, Vol. 336, pp. 2037-2040
김수민 박사 9편
2026
  • Contact-Induced Recombination Analysis for Photovoltaics (CIRAP) using one-time Suns-Voc
    Solar Energy Materials and Solar Cells, Vol. 297, pp. 114101
  • Load-resilient shingled photovoltaic module for field-scale thermoelectric coupling
    Scientific Reports
  • Thermally grown SiOx interlayers for stabilizing interfacial passivation in AlOx/SiOx/Si structures for high-efficiency solar cells
    Materials Science in Semiconductor Processing, Vol. 214, pp. 110876
2024
  • Study on the characteristics of increased mechanical stiffness according to changes in LCP shape to reinforce clavicle fractures
    Scientific Reports, Vol. 14, No. 1, pp. 6382
  • Solar-Powered AEM Electrolyzer via PGM-Free (Oxy) hydroxide Anode with Solar to Hydrogen Conversion Efficiency of 12.44\%
    Advanced Science, Vol. 11, No. 25, pp. 2401782
2022
  • Rapid evaluation system for photovoltaic cell and thermoelectric generator hybrid devices depending on temperature via transparent heater
    ACS Applied Energy Materials, Vol. 5, No. 3, pp. 2669-2674
  • Optical characterization and prediction with neural network modeling of various stoichiometries of perovskite materials using a hyperregression method
    Nanomaterials, Vol. 12, No. 6, pp. 932
  • Reaction Kinetics Analysis of Treatment Process on Light-Induced Degradation for p-Type Passivated Emitter and Rear Contact Solar Cell Module with Gallium Cz-Si Wafer
    Energies, Vol. 15, No. 10, pp. 3563
  • Numerical simulation and biomechanical analysis of locking screw caps on clavicle locking plates
    Medicine, Vol. 101, No. 30, pp. e29319
김정효 박사 13편
2025
  • Magnetically driven living microrobot swarms for aquatic micro-and nanoplastic cleanup
    ACS nano, Vol. 19, No. 30, pp. 27259
2024
  • Mechanochromic strain sensor by magnetoplasmonic amorphous photonic arrays
    Chemical Engineering Journal, Vol. 498, pp. 155297
  • Advanced materials for micro/nanorobotics
    Chemical Society Reviews, Vol. 53, No. 18, pp. 9190-9253
2023
  • Magnetically boosted 1D photoactive microswarm for COVID-19 face mask disruption
    Nature communications, Vol. 14, No. 1, pp. 935
2022
  • Microrobotic photocatalyst on-the-fly: 1D/2D nanoarchitectonic hybrid-based layered metal thiophosphate magnetic micromachines for enhanced photodegradation of nerve agent
    Chemical Engineering Journal, Vol. 446, pp. 137342
  • Hybrid magneto-photocatalytic microrobots for sunscreens pollutants decontamination
    Chemical Engineering Journal, Vol. 446, pp. 137139
  • Excitation-dependent emissive FeSe nanoparticles induced by chiral interlayer expansion and their multi-color bio-imaging
    Nano Today, Vol. 43, pp. 101424
  • Plasmonic-magnetic nanorobots for SARS-CoV-2 RNA detection through electronic readout
    Applied Materials Today, Vol. 27, pp. 101402
  • Rapid assembly of magnetoplasmonic photonic arrays for brilliant, noniridescent, and stimuli-responsive structural colors
    Small, Vol. 18, No. 17, pp. 2200317
2021
  • Clinical trial: Magnetoplasmonic ELISA for urine-based active tuberculosis detection and anti-tuberculosis therapy monitoring
    ACS central science, Vol. 7, No. 11, pp. 1898-1907
2019
  • FeSe quantum dots for in vivo multiphoton biomedical imaging
    Science Advances, Vol. 5, No. 12, pp. eaay0044
2018
  • Scalable solvothermal synthesis of superparamagnetic Fe3O4 nanoclusters for bioseparation and theragnostic probes
    ACS Applied Materials \& Interfaces, Vol. 10, No. 49, pp. 41935-41946
2017
  • Early detection of the growth of Mycobacterium tuberculosis using magnetophoretic immunoassay in liquid culture
    Biosensors and Bioelectronics, Vol. 96, pp. 68-76